Aeroflow XTR Drag Radial 255/60R15" 105W New Tyre 255 60 R15

Brand: Aeroflow

Product Type: Drag Radial Tyre

Tread Pattern: XTR Drag Radial

Tyre Size: 255/60R15"

Tyre Load/Speed Rating: 105W

Raised Lettering/Wall: No

Run Flat: No

Rolling Diameter: 687mm / 27"

Treadware Rating: TBA

Ply Rating: TBA

Condition: Brand New

Quantity: 1

Pattern Description

Xtreme Traction Radials (XTR) by Aeroflow Performance will have you leaving your competition in the dust. These drag radials are an affordable drag tyre that will provide extreme traction at a fraction of the cost. This tubeless radial constructed tyre with minimal tread pattern provides excellent tread contact on both the drag strip and road racing surfaces. Making XTR perfect for the hardcore racer, weekend warrior or roll racing competitor. Available in a variety of sizes and diameters with a sticky compound and a 105W speed and load rating, you can be sure these tyres will get you to the finish line.

XTR radials are manufactured using a premium two-piece mould construction, not a low-cost multi-piece mould. This ensures greater structural integrity and more consistent tyre shape from production run to production run. The entire manufacturing process is fully automated, with no manual interference during critical stages. This delivers exceptional consistency in tyre construction, which translates directly to improved balance and reduced vibration compared to many competitors. The result is a tyre that performs predictably and balances cleaner out of the box.

Tyre construction features Nylon sidewall and Nylon / fibreglass tread package.

Importantly, XTR radials are not a modified road tyre. They are purpose-built performance radials designed from the outset for drag racing applications.

WARRANTY

Xtreme Traction Radials by Aeroflow Performance are specifically designed for short duration competition use only.

Due to many varied and different conditions to which competition drag tyres are exposed to and because of the manner in which racing is conducted, these tyres are warranted for manufacturing defects only. Being a tyre intended for drag racing purposes, we recommend these be used for short duration use only. Once these tyres are mounted, they cannot be returned. These tyres must not be used on any rolling chassis dynometers, warranty will be void in this case.

Minimum tyre pressure of 13 psi with 14-18 psi cold start pressure is recommended for all XTR drag radial tyres.

It is recommended against mounting and fitting your own tyres to your rims due to the various safety hazards involved which can cause personal injury. This hazardous work is a job for professional trained personnel. The following are safety precautions not instructions on how to mount tyres.

• Never mount tyres on rims which are damaged, bent, chipped or rusted
• The inside of the tyre and rim must be free from any foreign material
• Always be sure that the rim diameter and the tyre diameter are the same
• Ensure you have the correct size width tyre to match your rim width
• Always lubricate both bead and rim flange with approved lubricant
• Never inflate above 44 psi to seat the bead
• Always after bead has been seated, adjust to recommended inflation pressures
• Never mix bias tyres with radials on the same vehicle and never mix tyre sizes on the same axle

NOTE: All XTR tyres are designed for competition use ONLY! - It is illegal to sell this competition drag tyre for use on public roads. Anyone found to be selling this tyre for this purpose accepts all liability and will compensate Aeroflow Performance for any and all damages incurred as a result of this sale.